Abrasives & Rotary Instruments

The Ultimate Diamond Impregnated Discs
For all ceramics including
Zirconium & Lithium Disilicates

Smooth Finishing - Fast Cutting - Cool Running - Long Lasting
 
Diamond Disk 20mm
Diamond Disk 22mm
 
 
26mm Dia. #FZLRB(Coarse)
26mm Dia. #FZLBB(Fine)
 
Final High Shine
FHS26
FHS17
FHS13
FHS18
26mm Dia. #FHS26
Wheel 17mm x 3mm
#FHS17
Small Point
13mm x 4.5mm
#FHS13
Large Point
18mm x 5.5 mm
#FHS18
These highly diamond impregnated discs are specifically designed to contour and polish
restorations made of harder type restorative materials. While these 26mm, knife edge discs
cut aggressively they leave a smooth surface.
The Red Berry and Blue Berry discs are economical to use. They will outlast similar
appearing discs and provide additional useable finishing surfaces.
The High Shine Disc, Wheel, and Points quickly produce a natural glaze appearance with
reduced friction and heat build-up.

Z-MAX

A new generation of abrasive instruments for the new generation of
restorative materials.
Zirconium (Zr) and Lithium Disilicate (Lisi) surface hardness and sensitivity to
heat has created a need for a new generation of finishing instruments.
Faster finishing, smoother surfaces, and reduced friction heat build-up make the
Z-Max instruments the best choice for technicians.

FZM-001 FZM-002 FZM-003 FZM-004

22mm x 4.5mm
#FZM-001

15mm x 3.5mm
#FZM-002
22mm x 2mm
#FZM-003
22mm x 0.7 mm
#FZM-004
FZM-005 FZM-006 FZM-007  
Sm. Barrel
4.8mm x 13mm
#FZM-005
Lg, Barrel
6.5mm x 13mm
#FZM-006
Cone
3.5mm x 11mm
#FZM-007
 
FZM-008 FZM-009    
Inverted Cone
12mm x 6mm
#FZM-008
Inv. Sm. Cone
6mm x 8mm
#FZM-009
   

The Z-Max instruments are constructed with a high content of fine diamond
particles in a special compound that is cured under high pressure and vacuumed for
eight hours.
The Z-Max instruments operate most efficiently with light pressure at about 10000
RPM. When used with these parameters they will last 2-3 times longer than other
finishing instruments.


speedster
Speedster Zr Plus is a specialty diamond bur designed to simplify procedures involving Zirconia, Alumina & Porcelain.

The uniformly-layered, synthetic diamond coating:

  • Enables precise cutting
  • Reduces the risk of chipping or micro-fracturing
  • Lasts longer than standard multi-use diamond burs
  • Provides increased surface contact when compared to natural diamonds
  • Reduces procedure time for Zirconia crown & bridge removal and adjustment
  • Unique, synthetic diamond coating allows for chatter-free endo access through porcelain and Zirconia
Fine grit enables exact interproximal contact and occlusal adjustment
speedster box

 

 
Pointed Football
Football
 
RZ368F023FG
RZ379F023FG
RZ390F018FG
Shape
368
379
390
Head0 (1/10mm)
023
023
018
Head Len.(mm)
5.3
4.5
3.0
Fine
RZ368F023FG
RZ379F023FG
RZ390F018FG

 

Round
RZ801LF012FG
RZ801LF014FG
RZ801LF018FG
RZ801LF022FG
Shape
801L
801L
801
801
Head0 (1/10mm)
012
014
018
022
Head Len.(mm)
3.0
Fine
RZ801LF012FG
RZ801LF014FG
RZ801LF018FG
RZ801LF022FG

 

 
Long Inverted Cone
RZ807F014FG
RZ807F016FG
Shape
807
807
Head0 (1/10mm)
014
016
Head Len.(mm)
4.0
5.0
Fine
RZ807F014FG
RZ807F016FG
Round End Taper
Flame
RZ856F018FG
RZ856F025FG
RZ862F014FG
RZ889F010FG
Shape
856
856
862
889
Head0 (1/10mm)
018
025
014
010
Head Len.(mm)
8.0
8.0
8.0
4.0
Fine
RZ856F018FG
RZ856F025FG
RZ862F014FG
RZ889F010FG

 

Beveled Cylinder
Curettage/Pointed Taper
RZ885F012FG
RZ878F021FG
Shape
885
878K
Head0 (1/10mm)
012
021
Head Len.(mm)
5.0
8.0
Fine
RZ885F012FG
RZ878F021FG

 


Sintered Diamond Burs

141   sintered165
sintered001   sintered014
sintered041   sintered068
sintered111   sintered172
sintered198   sintered199
sintered263   sintered304
sintered274    

Flexible Diamond Discs (medium grit)

355D 355
345D 345
350D 350
360  

Red Rider Cut-off and Finishing Discs

Newly developed technologies have led to improvements in durability, efficiency and comfort with finishing and cutting tasks using the new Red Rider Discs.

We have incorporated the strength, durability and cutting efficiency of Alumina in the fabrication of the new, non-contaminating Red Rider Discs.

Red Rider Discs:
  • Cuts and Finishes all alloys faster than conventional discs
  • Last longer, even on hard, chrome alloys
  • Reduces heat build up
  • Increased durability, high resistance to breakage
  • Reduces metal waste
  • Reduces unpleasant odors
  • Eliminates black lines on porcelain surfaces

RED RIDER DISCS are available for:

Item#                       Metal Finishing:
FRR38100 - 38 mm X .6 mm Box of 100
FRR29100 - 29 mm X .5 mm Box of 100
FSTM100 - 22 mm X .25 mm Super Thins Box of 100  

Item#                       Ceramics: 
FSTC100 - 22 mm X .25 mm Super Thins Box 100
FRR25C100 - 25 mm X .6 mm Box 100




Finishing Ceramics


Finishing Crown & bridge Alloys


Cut-off and Finishing Partial Frames