News — Clogging

Helpful Tips for Using Cad Spray Glaze & FAQ’S The glaze powder is heavy and quickly settles/separates from the liquid carrier. Prior to use and continually during use, shake the can thoroughly (10-15 times). Position tip only about 4-6 inches from restoration. Depress the spray head completely down in short one second bursts. Usually 3-4 bursts are required per unit. After use, turn can up side down and depress the spray head to clear any remaining glaze from the nozzle. This will help prevent future clogging of the tip. After use store the can on its side (not upright) the...